Advertising: Changing your car’s tyres
Sometimes it would be better to hire a professional to change your tyres.
Thursday 8th of September 2011
Changing tyres can be a difficult task and sometimes it would be preferable to assign it to professionals specially trained and equipped. Before disassemble any tyre, it is necessary to remove the valve and its mechanism in order to completely deflate the tire. The various parts involved in the installation of new tyres - such as the valve, the valve cap and the chamber (for tyres with tubes) - must always be changed. Some tyres have a rotation direction that is essential to observe during installation. Their outer side ("outside") is sometimes specified. When mounting the tyre on the rim, it is imperative not to exceed 3.5 bar pressure.
At the end of installation, make sure the valve cap is tight, to ensure maximum tightness of new tyres. Finally, after a few hundred kilometers, check the tightness of bolts in each wheel.
Balancing
Balancing is required for each change of tire on the rim in order to remove vibrations and the effects of unbalance of the rotating assembly. Balancing is necessary for both front and rear tyres of your vehicle. Note that your tyres and the mechanical parts of your vehicle such as suspensions, bearings or direction are just a few examples of parts, which may wear out prematurely if your tyres are not balanced.
Geometry
A review of the geometry may be necessary, because it can be slightly cranky, for example following an impact against the sidewalk. Good geometry increases the life of your tyres, improves the handling of your vehicle and saves fuel. Poor geometry is difficult to detect in a driving situation, for this reason it is advisable to revise the geometry at each tire change. Note that the behavior of your vehicle and your safety may be jeopardized in case of geometry mistuning.
Geometry needs to be adjusted if you notice:
* abnormal wear on the inner or outer edges of the tires,
* a tendency to pull to one side when acceleration and to the other when braking,
* a tendency to pull right or left at constant speed on flat road,
* a certain hardness in the direction,
* poor centering of the steering wheel
* after a turn, the wheels do not come back quickly to a "straight line".
Any need for alignment is the result of a defective item or a sudden shock (such as a "sidewalk hit") which amended the initial settings. When it comes to tyre levers or tyre changing tools, RLM Distributing is one of the companies you need to contact.
At the end of installation, make sure the valve cap is tight, to ensure maximum tightness of new tyres. Finally, after a few hundred kilometers, check the tightness of bolts in each wheel.
Balancing
Balancing is required for each change of tire on the rim in order to remove vibrations and the effects of unbalance of the rotating assembly. Balancing is necessary for both front and rear tyres of your vehicle. Note that your tyres and the mechanical parts of your vehicle such as suspensions, bearings or direction are just a few examples of parts, which may wear out prematurely if your tyres are not balanced.
Geometry
A review of the geometry may be necessary, because it can be slightly cranky, for example following an impact against the sidewalk. Good geometry increases the life of your tyres, improves the handling of your vehicle and saves fuel. Poor geometry is difficult to detect in a driving situation, for this reason it is advisable to revise the geometry at each tire change. Note that the behavior of your vehicle and your safety may be jeopardized in case of geometry mistuning.
Geometry needs to be adjusted if you notice:
* abnormal wear on the inner or outer edges of the tires,
* a tendency to pull to one side when acceleration and to the other when braking,
* a tendency to pull right or left at constant speed on flat road,
* a certain hardness in the direction,
* poor centering of the steering wheel
* after a turn, the wheels do not come back quickly to a "straight line".
Any need for alignment is the result of a defective item or a sudden shock (such as a "sidewalk hit") which amended the initial settings. When it comes to tyre levers or tyre changing tools, RLM Distributing is one of the companies you need to contact.
About the author
| Name: | magikandrea |
|---|
Share
Comments
Log in to post comment, or use
